Details

---

The TP-Link VIGI SP9030 is an intelligent solar power supply system with a 90W solar panel and a 30Ah/10.8V lithium battery (≈324Wh). It’s designed to power 1–2 surveillance devices (like a single 4G camera or AP) in remote or off-grid environments, with up to 8.5 days backup under light load.

---

☀️ VIGI SP9030 – Product Details

Feature	Specification
Solar Panel	90W photovoltaic panel (998 × 516 × 30 mm)
Battery	30Ah / 10.8V lithium battery (≈324Wh capacity, >500 cycles)
Output Ports	3 × DC voltage outputs (9–12.6V/2A)
Charging Controller	MPPT (Maximum Power Point Tracking)
Backup Duration	Up to 8.5 days on light load (e.g., 1 camera)
On-load Charge (Sunny Days)	~1.5 days
Weatherproofing	IP66-rated for outdoor deployment
Mounting Angles	Adjustable: 5°, 15°, 25°, 35°, 45°, 55°
Smart Features	Intelligent auxiliary heating, independent protection circuit
Remote Management	Supports remote monitoring and troubleshooting
Operating Temperature	Charging: -20°C to 45°C; Discharging: -30°C to 60°C

 

---

🛠 Deployment Use Cases

Thong, the SP9030 is best suited for:

• Guard posts or single camera setups → e.g., 1 × VIGI 4G camera at a rural petrol pump.
• Wireless bridges → powering a single AP or bridge in hilly terrain.
• Temporary monitoring points → small construction zones or container cabins needing 1–2 devices.

---

⚡ Practical Limitation

• Not enough for 4 cameras + AP → At ~52W load, the 324Wh battery lasts only ~6 hours without sun.
• For larger deployments (like your 4 × S345ZI + 1 × EAP650-Outdoor), you’ll need SP18090 or multiple SP9030 units.